Sorry to hear a rail broke on your Thule TracRac SR!
The # TH43003XT-785EX you purchased for your '22 Ford F-250 with the 6-3/4' bed does have a limited lifetime warranty so you can see if the rail is covered under warranty depending on exactly what caused it to break.
Your other option is replacing the rail out of your pocket, though you'll need the # TH21785 as the rail you were looking at is not a fit for your truck. view full answer...
There is a wireless remote for your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 or # LC675817, though it is different than the one you mentioned.
For a wireless remote for the Ground Control 3.0 the correct part is the Replacement Touchscreen Remote with Charger for Lippert Ground Control 3.0 Electric Leveling System # LC358601. view full answer...
The Replacement Pigtail for the Rectangular LED Trailer Clearance, Side Marker Light, 4 Diode - Red
Item # MCL76RB that you referenced is part # AL42PB on our site. I confirmed this with my contact at Optronics. view full answer...
The date code you kindly provided identifies your existing tonneau as a TruXedo Lo Pro # TX569101, according to my TruXedo representative. The replacement tarp for that cover is part # TX569101-CVR. view full answer...
There are replacement parts for the Bright Way Push-to-Test ICU Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery part # BW94FR but the case/charger is not one of them. Therefore, if you want to upgrade you'd be looking at an entire new system but as the case and charger are the bulk of the kit, you aren't wasting much money. Furthermore, not all breakaway batteries fit in this case so you need to be sure you're using the one that comes with. view full answer...
Thanks for reaching out and providing your photo!
To replace the trim rings for the OEM puck system on your 2020 Ford F-250 you'll want the Kit # RP58458 and then to cover up the gooseneck hole we have the part # RP30136.
Unfortunately a trim ring doesn't exist as a replacement part for that gooseneck section so if you want something like that you'll have to get creative with some trim and a gasket seal like part # LT37467. Otherwise the cover that I mentioned above will cover the entire... view full answer...
The Replacement U-Bolt Safety Chain Kit # 6308 contains the U-bolts used for the Fold-Down Gooseneck Trailer Hitch # 8339-4449 on your 1999 Ford F-250. view full answer...
Yes, for the outer link for 8 inch trailer frames use # EQ90-02-5378. The inner is # EQ90-02-5208. The outer for 10 inch frames is # EQ90-02-5379 and the inner is # EQ90-02-5210. If you change the outers you also have to change the inners if you don't already have them. view full answer...
In order to get the front header plug for the TruXedo TruXport cover on your 2009 Ford F-250 you will need the Replacement Cab End Corner and Weather Seal Kit for TruXedo TruXport Tonneau Covers # TX1118262. TruXedo does not offer the single plug as a replacement part, so the kit is the only option. This comes with the driver and passenger's side plug along with the corner weather seals.
I have attached a video review for your reference. view full answer...
We do have a solution for you but unfortunately the rubber boot that you referenced isn't available as a replacement part from Lippert. If that is in bad shape then you will need to replace your motor.
The correct replacement motor for the Stabilizer Jack # LC298707 is part # LC352338 so if this is the jack that you have then you need this replacement motor. view full answer...
I went ahead and confirmed with my tech at Thule that the only replacement upright part they have made as a replacement for the Thule TracRac TracONE system like the # TH27000XT that fits a 2002 Ford F-250 is the replacement modular upright # 8523446001. This is the correct and only replacement.
The reason for the discrepancy is most likely that the 26-1/4" measurement on the # TH27000XT includes part of the lower foot attachment as well as the top bracket attachment. This adds a bit... view full answer...
We do have the replacement tarp you need for the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX559101 that fits your 2001 Ford F-250 with a 6-3/4 foo bed. The correct replacement is the following:
- Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX559101-CVR view full answer...
For your welded plate, the Replacement Bolt-On Mounting Kit for Fulton XP Series Jack # F500349 sounds like what you are describing but it isn't a welded plate. If that is similar to what you have, then I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301.
The center bolt is the style that many jacks will work with. If you have this, then this will be a good fit. If that isn't what you have then the snap ring jack like the Fulton... view full answer...
I'm not sure how to find out the age of your setup, but when I passed your photos along to my contact at Equal-i-zer he said that all you need to do for the upgraded system is swap out your 12K head unit for the 14K # EQ90-02-1400. Since your hardware looks like it's seen better days you might also consider replacing those with part # EQ90-02-9100 while you're at it.
The reason you only need to swap out the head is because the 12K and 14K Equal-i-zer systems both has the same size bars... view full answer...
I'm assuming you're referring to plumbing vents so I would recommend the Camco Replace-All RV Plumbing Vent Kit -Black # CAM40138 or # CAM40033 for white. Both of these kits come with mounting hardware and putty to form a tight seal to your trailer's roof, but you'll also want to use some self-leveling sealant # 34427034145-1 as well.
I've attached a video below of the installation I did for the Ultra-Fab Solar-Powered Plumbing Vent # UF53-945001 to give you a better idea of how installation... view full answer...
It looks like you may have the Westin Sportsman Grille Guard # 45-0220 which uses the Replacement Hardware Kit # 40-022PK for your 1999 Ford F-250 Super Duty.
Please note that grille guards and mounting hardware are specific not only to each other but also to what vehicle they fit on so if that isn't a Westin Sportsman (which the design looks slightly different) that is made to fit your 1999 F-250 then it won't fit your truck without modification. In that case I recommend getting a new... view full answer...
The Progressive Dynamics PD9200 Series Inteli-Power Converter - 12 Volts - 45 Amps # PD9245C is 8-1/4" long x 7-1/4" wide x 4-11/16" deep. If this fits in the slot you are referring to in the bottom of the power panel then you will be all set. You can cut the plug off the end and hardwire it as you stated, but that will void the warranty because you will be altering the manufactured product. view full answer...
The correct replacement hardware for your BAk Revolver X2 part # BAK39330 is the Replacement Roll Top Cover Mounting Hardware Kit for BAK Revolver X2 Hard Tonneau Covers part # PARTS-254A0004. I reached out to BAk and they didn't have specifics on the size available. view full answer...